PUQpress M3 Automatic Tamper for Mahlkönig E65S — 58.3mm

Specifications

Pulled directly from PUQpress's product page for the M3.

Spec	PUQpress M3
Designed For	Mahlkönig E65S & E65S GbW
Tamping Pressure Range	5–30 kg, adjustable in 1 kg steps
Tamp Diameter	53–58.3 mm
Portafilter Compatibility	Naked, single-spout, double-spout
Tamping Profiles	Speedy, Precision, Hulk, Soft, Single
Adjustment Wheel	Yes
Rated Weekly Capacity	More than 10 kg of coffee per week
Dimensions (H×W×D)	28.3 × 19.4 × 14.7 cm
Weight	4.6 kg
Power	76 W, 110–240 VAC, 50/60 Hz
Warranty	2 years / unlimited tamps

Grinder Fit

PUQpress builds the M3 to mount specifically to the Mahlkönig E65S and E65S GbW — both share the same 65 mm burr platform and chute geometry, so one mount fits either variant whether or not the grinder has Grind-by-Weight hardware. DABOV carries both: the timer-dosing Mahlkönig E65S and the gravimetric Mahlkönig E65S GbW.

The M3 is not a universal fit for other grinders — PUQpress builds separate integrated models for other chassis: M2 for Mythos, M4 for Fiorenzato, and M5 for the larger Mahlkönig E80S. If your bar runs a different brand's grinder, a PUQpress Q standalone tamper works with any 58.3 mm-basket setup instead.

Did You Know

• Australian cafes alone tamp an estimated 8 million coffees a day using PUQpress, according to the company's own figures — one measure of how deeply automatic tamping has embedded itself into commercial espresso workflow in markets that adopted it early.

• The E65S and E65S GbW mount to the exact same M3 hardware. PUQpress engineered one bracket to fit both variants of Mahlkönig's 65 mm burr platform, so a café can add Grind-by-Weight later without swapping the tamper.

• At 4.6 kg, the M3 is the lightest of PUQpress's grinder-integrated tampers — lighter than the M2, M4, M5, and M6, reflecting the E65S's own compact chassis relative to Mahlkönig's larger E80S.

What grinder does the PUQpress M3 mount to?

The Mahlkönig E65S and E65S GbW — see E65S and E65S GbW in our grinder lineup.

What tamping pressure does the M3 use?

5 to 30 kg, adjustable in 1 kg steps.

What portafilter sizes fit the M3?

Its tamp diameter spans 53–58.3 mm, across naked, single-spout, and double-spout portafilter styles.

Does the M3 fit the E65S GbW as well as the standard E65S?

Yes — both variants share the same 65 mm burr platform and chute geometry, so one M3 mounts either grinder.

How much coffee is the M3 rated to handle per week?

PUQpress rates it for more than 10 kg per week.

Will the M3 fit a Mahlkönig E80S instead?

No — the E80S uses the larger M5 mount. The M3 is sized specifically for the E65S's smaller chassis.

What warranty does the M3 carry?

2 years or unlimited tamps, per PUQpress's published terms.