Tone Touch 03 Commercial Coffee Brewer

Specifications

Figures below come from TONE's own product page and printed instruction manual for the Touch 03.

Spec	TONE Touch 03
Capacity	Programmable 200 ml–1.5 L per batch
Brew Method	Tankless, heat-on-demand (94°C/201°F within ~2 seconds); touchbutton control of temperature, flow rate, pulse, and pre-infusion delay across bloom/turbulence/development phases
Power	3,450 W, 220–240V 50/60Hz
Certifications	SCA Best New Product Awards 2021 — Finalist, Commercial Coffee Preparation & Serving Equipment
Dimensions	—
Warranty	1-year parts (2-year parts / 1-year labor on electronic circuit & control boards)

Who It's For

The Touch 03 is for a café, hotel lobby, or hospitality bar that wants full control over brew chemistry — bloom time, flow rate, pulse pattern — without committing to a high-volume batch brewer built for 4-liter runs. Its 1.5 L ceiling is the deliberate tradeoff: it's sized for a specialty program serving carafes and single pours rather than banquet-scale batches, and the tankless design means there's no standing reservoir of water losing freshness between brews.

The recipe-level parameter control is the real draw for a shop running a rotating single-origin or filter program: a barista can dial in a distinct bloom-turbulence-development profile per coffee and save it, rather than running every bean through the same generic cycle. Remote calibration via the optional WiFi antenna suits an operation managing recipes across multiple stations or locations from one tablet.

A venue that regularly needs more than 1.5 L per brew cycle — a hotel breakfast service or a high-traffic café running back-to-back carafes — should look at the Touch 04 instead, which scales up to 4 L batches on the same parameter-driven platform.

Did You Know

• The TONE Touch 03 was a finalist in the Specialty Coffee Association's 2021 Best New Product Awards, recognized in the commercial coffee preparation and serving equipment category for its tankless heat-on-demand design.

• Tankless brewers heat water fresh for each cycle instead of storing it hot in a tank between brews — the Touch 03 reaches 94°C in about two seconds, which avoids the flat, stale-tasting water that can develop in a standing reservoir over a long shift.

• Splitting a brew cycle into bloom, turbulence, and development phases mirrors how specialty baristas manually pour a V60 — the Touch 03 automates that same three-stage structure with programmable flow and pulse settings instead of a hand pour.

What is the maximum batch size for the TONE Touch 03?

1.5 liters, programmable down to a 200 ml single pour.

Is the TONE Touch 03 SCA certified?

It was a finalist in the SCA's 2021 Best New Product Awards in the commercial coffee preparation and serving equipment category.

What does "tankless" mean for the Touch 03?

There's no stored hot-water tank — water heats on demand to 94°C within about two seconds of each brew cycle starting.

Can I control the brew parameters on the Touch 03?

Yes — temperature, flow rate, pulse pattern, and pre-infusion delay are all programmable across the bloom, turbulence, and development phases.

What's the difference between the Touch 03 and the Touch 04?

The Touch 03 tops out at 1.5 L per batch; the Touch 04 scales to 4 L with dual heating elements and TONE's Beverage Manager software.

What voltage does the Touch 03 need?

220–240V, 50/60Hz, drawing 3,450W.

What's the warranty on the Touch 03?

1-year parts coverage overall, with 2-year parts and 1-year labor specifically on the electronic circuit and control boards. Browse the rest of the range on the coffee brewers category page or the full equipment lineup.